Widely used in high-temperature, high-cleanliness epoxy curing and sintering processes for products such as electronic ceramics, ceramic filters, magnetic materials, and electronic devices.

2. Mainly Specifics:

Product model: HBF52-17 high-temperature box furnace
Rated temperature: 1650°C
Maximum temperature: 1,700°C
Effective dimensions (W × H × D): 350 × 300 × 500
Furnace lining material: inner layer of alumina product
Heating element: silicon-molybdenum rod
Temperature uniformity of the furnace chamber: ±2.5°C (holding at a constant temperature of 1650°C for two hours while maintaining the platform at that temperature)
Number of program steps: 4 × 16 segments
Number of temperature control points: 1 point
Alarm protection: The heating process and the opening/closing of the furnace door are interlocked, and there will be an audible and visual alarm in case of overheating, broken thermocouple, or low pressure.
Maximum heating power: ≤25kW
Power requirements: three-phase five-wire, 220/380VAC, 50Hz, greater than 34kVA

Detailed Photos

4. Installation and usage conditions for the equipment
1) The device must be installed indoors, in an environment with a temperature range of 0°C to 40°C. The area must be free from flammable gases, corrosive gases, and steam.
2) The equipment must occupy a minimum area of 5 square meters, with a working space that is at least 2.5 meters long and 2 meters wide, and the height should not be lower than 3 meters. The foundation should be solid and flat, and the total weight of the furnace is approximately 850 kg.
3) The power source for this furnace must be a three-phase, five-wire AC power line with a voltage of 380 ± 10% V and a frequency of 50 ± 2% Hz. This power line is dedicated and should not be connected to any large power conversion equipment such as welding machines, electro-mechanical furnaces, or metal cutting machinery.
4) The equipment must be properly grounded to ensure safety.
5) The inlet pressure for the equipment ranges from 0.2 to 0.4 MPa.

Hefei Chitherm Equipment Co., Ltd. is an advanced equipment supplier specializing in the research and development, design, manufacturing, sales, maintenance, and service of high-, medium-, and low-temperature industrial furnaces and laboratory furnaces. Its product range encompasses bell furnaces, box furnaces, hot air furnaces, vacuum furnaces, tube furnaces, mesh belt furnaces, bogie hearth furnaces, rotary furnaces, roller hearth furnaces, and pusher furnaces, which are extensively applied in fields such as advanced ceramics, electronic components, thick-film circuits, additive manufacturing, powder metallurgy, new energy, and photovoltaics. These furnaces are suitable for thermal treatment processes of materials including ITO targets, MLCC/HTCC/LTCC, ceramic filters, magnetic materials, CIM/MIM, and lithium battery cathodes and anodes, as well as various other new material processes such as pre-sintering, dewaxing, degreasing, sintering, drying, heat treatment, curing, and ceramization.

1.What products does Chitherm offer?
We provide customers with high-quality bell furnaces, hot air furnaces, box furnaces, tube furnaces, vacuum furnaces, car bottom furnaces, rotary kilns, mesh belt furnaces, and pusher furnaces.
2.What pre-sales services does Chitherm provide?
We offer timely consultation services to help customers select the most suitable products, along with highly customizable solutions to meet your specific requirements.
3.What are Chitherm's core strengths?
As a high-tech enterprise integrating R&D, manufacturing, and sales, Chitherm possesses patented technologies and core resources to deliver superior solutions.

Hefei Chitherm Equipment Co., Ltd. is a professional enterprise engaged in the research and development, design, manufacturing, sales, maintenance and service of high, medium and low temperature industrial furnaces and experimental furnaces.

Our products include Bell Furnaces, Box Furnaces, Hot Air Dryer, Tube Furnaces, Vacuum Furnaces, Trolley Furnaces, and Rotary Furnaces. All of which are widely used in scientific research and experimentation in advanced ceramics, additive manufacturing, powder metallurgy, new energy and other fields. Suitable for the extrusion, sintering process of magnetic materials, honeycomb ceramics, alumina ceramics, zirconia ceramics, CIM/MIM, and positive and negative electrode materials of lithium batteries, as well as various other new materials such as pre-firing, extrusion, degreasing, firing, drying, co-firing, post-firing, soldering, curing, ceramic metallization, etc.

We insist responsible attitude towards customers and provide high-quality products and services. It is precisely because of the support, understanding, and trust of our customers and friends that our intelligent equipment manufacturing capabilities continue to improve. We are willing to work with customers to support the rapid development of electronis and advance materials all over the world.